Choosing a 700mm Black Towel Rail: Size, Fit and Heating Options
Quick answer
Choose a 700mm black towel rail by checking its complete installed footprint, the height and bar layout you can use, and its output at your heating system’s operating temperatures. In our current central-heating range, the body is 700mm wide and the listed radiator pipe centres are 650mm. Those measurements do not describe the same thing, and neither guarantees a direct replacement for an existing rail.
Product image from the current 700mm-wide, 1000mm-high listing. Use the selected model’s drawing and specifications for installation measurements.
A broad wall can make a wider towel rail a practical choice, but the decision still needs to work around doors, furniture, pipework and everyday towel use. This guide brings those checks together for the 700mm matt black range, with links to five detailed guides where you need a closer look.
Watch: four checks before choosing a 700mm black towel rail
This 44-second buying guide covers wall space, radiator pipe centres, heat output and the valve package.
Read the video transcript
Choosing a 700mm black towel rail? Check these four things before ordering.
Measure the complete installed footprint, including valves and clearances. Choose a height that suits your wall and towels.
Our current range lists a 700mm body and 650mm radiator connection centres. Check your pipework separately.
Compare the exact model’s heat output with your room’s requirements at your system’s operating temperatures.
Confirm valve shape and heating type. Electric and dual fuel need the correct separate package.
Explore our 700mm black collection through the collection link in this article.
1. Choose the height after measuring the usable wall
Start with the finished wall area, including anything that moves through it. Record the available width and height, the position of a window ledge or shelf, door and drawer movement, and the space needed to reach the valves. Include projection into the room as well as the outline you see from the front.
Our current 700mm-wide central-heating range has 400mm, 600mm, 800mm, 1000mm and 1200mm body heights. Use those as a shortlist of shapes rather than a guide to floor-to-top installation height: the mounting position and fittings also affect the complete footprint.
| Layout to investigate | What to check |
|---|---|
| A lower rail beneath a ledge | Body height, mounting position, ledge clearance, towel overhang and access to fittings. Being a shorter model does not establish that it will fit under a particular window. |
| A taller rail on a clear wall | Upper fixing positions, comfortable reach, usable bar gaps, filled weight and the wall’s support requirements. |
Compare your actual towels with the usable bars. Body width is not the same as unobstructed hanging length, and a taller model does not promise a fixed towel count. Our towel radiator height guide explains how mounting position, reach and towel space affect the choice.
2. Separate the 700mm body width from the pipe measurements
The current range lists a 700mm body width and 650mm radiator pipe centres. Record the spacing of your existing supply pipes separately, together with their direction of approach and distance from the finished wall. The chosen valves sit between the supply pipes and the radiator connections, so their shape and dimensions belong in the comparison.
For example, an existing 650mm pipe measurement is a useful starting point, but it does not by itself confirm a direct swap. The valve arrangement, connection orientation, wall distance and bracket positions still need checking. An existing 700mm pipe spacing should not be treated as a match merely because the new radiator has a 700mm body.
Use the selected product drawing and ask your installer to confirm the complete arrangement before ordering. Keep photographs and measurements together using the pipe-centre measuring and replacement guide. Do not apply a width-minus-50mm rule to other radiator designs.
3. Check the room requirement against the exact model
Decide whether the towel rail will heat the room, mainly warm towels, or work alongside another heat source. A bathroom with underfloor heating presents a different design question from one relying on the towel rail alone.
Compare the room’s assessed heat requirement with the selected model’s output at the intended flow, return and room temperatures. Height, bar arrangement and the operating conditions affect that comparison. A 700mm width is a physical measurement, not a heating-capacity rating.
The collection displays the outputs currently listed for each height. Confirm the rating conditions with us before using those figures to assess a lower-temperature system or heat pump. If the available rail cannot meet the room requirement, discuss suitable additional heating or a different model with your installer.
The radiator heat-output and BTU guide explains the difference between room heat loss, rated radiator output and electric input. An electric element’s wattage is a separate specification; a water-fed BTU/h figure does not tell you the selected element rating.
4. Confirm the heating version and valve package
The five products in this central-heating collection offer Without valves, straight inline valves or angled valves. Brackets, supplied mounting fixings, an air vent and a blanking plug are included. A matching valve pair is supplied only when the corresponding valve option is selected.
Choose valve shape using both the pipe approach and radiator connection orientation. Do not decide from a photograph of a different bathroom. Include the valve body, any necessary pipe adaptation and operating access in the installed footprint. The straight versus angled valve fitting guide provides a checklist for that discussion.
If you need electric-only or dual-fuel operation, use the matching heating-kit listing linked from the individual product page. A valve option on a central-heating listing does not include an electric element. Check the selected package’s contents, filling requirements and installation instructions before comparing the final order.
5. Compare the finish after confirming the specification
Matt black can coordinate with dark taps, shower fittings or other bathroom details. Check the actual tone, sheen and texture of visible valves and accessories; the word “black” alone does not establish a perfect finish match.
If chrome is also on your shortlist, compare exact models. Matching body dimensions do not establish identical connection positions, included parts or rated outputs. Use our black-versus-chrome specification checklist to keep appearance and technical suitability in the same comparison.
Follow the selected radiator’s care instructions and avoid treating a coating as a guarantee against damage. Keep the product information and supplied fitting instructions with your order so they are available for installation and later maintenance.
Build a complete shortlist before ordering
- Record the exact model, 700mm body width and chosen height.
- Compare radiator pipe centres, existing supply pipes and the complete valve arrangement.
- Check projection, mounting position, wall support, clearances and comfortable towel access.
- Confirm the room requirement and the model output at the proposed operating temperatures.
- Choose central heating, electric-only or dual fuel, then check the exact package and parts supplied.
- Review the current product availability, delivery details and installation plan.
With those checks recorded, compare the 700mm-wide black towel rails by height and listed output. If a detail is missing from your shortlisted product, send our Coventry team the model and your measurements before finalising the order.
Questions about choosing a 700mm black towel rail
Does a 700mm rail need only 700mm of wall space?
No. The body width is one part of the installed footprint. Allow for the selected valves, pipework, projection, manufacturer’s clearances, towels and access around nearby fittings.
Which height is best for a family bathroom?
There is no single best height. Compare the available wall, practical reach, your towel arrangement and the exact model’s output against the room requirement. The five available heights provide different shapes to assess, not guaranteed bathroom-size categories.
Can I keep the old valves when replacing a radiator?
Only if the complete proposed connection is suitable. Have the installer check the old valves’ condition, connection compatibility, dimensions and arrangement against the new model. Matching body width does not establish compatibility.



