Replacing an Unvented Cylinder T&P Valve: What to Check Before Buying
Start with the cylinder manufacturer’s replacement part reference. A photo of the cylinder data plate and the valve markings gives your installer a starting point.
- Record the cylinder make, model and serial number.
- Find the approved part reference in the cylinder manual or ask the manufacturer.
- Confirm the required pressure rating, temperature rating and discharge capacity.
- Confirm the thread configuration, sealing requirements and temperature probe dimensions.
- Ask a competent installer to confirm the replacement and check the discharge route before fitting.
If the manual lists a different part or the probe dimensions are missing, obtain confirmation before ordering. For the Turkish Zone valve, the listed figures are 7 bar, 90°C and 1/2″ BSP. Check those alongside the other requirements.
See how to read the valve ratings, how to check BSP fit and the main T&P relief valve guide.



