Radiator Cover Caps for Towel Rails: Matt Black and Chrome
Quick answer
A push-fit radiator cover cap hides the visible face of a compatible metal bleed valve or blanking plug. Our matt black and polished chrome caps come in pairs. Both have a 24mm inside diameter and 6.6mm inside depth. Check the width, depth and shape of the existing fitting before choosing a finish.
See what a cover cap changes

The existing fitting stays in place beneath the cap. The blanking plug closes an unused port, and the bleed valve lets trapped air out when opened for servicing. If the fitting needs attention, see our air vent and blanking plug guide.
Check the fit before you order
- Width. Check the widest part of the visible metal head. Measure across any corners that the round cap must clear.
- Depth. Check how far the fitting stands proud, including the highest point of the bleed screw or head.
- Space around the fitting. The cap is 28mm across on the outside. Check that it can sit straight without fouling the rail or a nearby surface.
The dimensions describe the cap itself. A fitting with a ½-inch BSP thread can have a different head shape or width. Both listings exclude white plastic bleed valves.
Choose your finish and count the fittings
The matt black cap is made from ABS plastic. The polished chrome cap is metal. Each pack contains two caps, so one pair can cover two compatible fittings. Check each fitting individually, even when both are at the top of the same rail. Choose matt black cover caps or polished chrome cover caps to match your rail or nearby fittings.


