How to Measure for a 24mm Radiator Cover Cap
Quick answer
Measure the visible head of the fitting across its widest point, then measure how far it projects. Our caps have 24mm of internal diameter and 6.6mm of internal depth. The thread size describes the connection inside the rail.
Measure across the widest part
With the rail cool, hold callipers across the visible fitting, keeping them clear of the bleed screw. On a hexagonal head, check across opposite corners as well as across the flats. A head may appear to be under 24mm when measured flat to flat but still be too wide to enter a round cap.
Check the highest point
Use the surface where you expect the cap to sit as the starting point. Include any raised centre or screw head when measuring how far the fitting stands proud. An otherwise suitable fitting may stop the cap seating if it projects farther than the inside depth.
Allow room for the outside of the cap
Check the space around the fitting against a 28mm paper circle. Centre it over the fitting and look for interference from a shoulder on the rail, a ledge or the wall. Record the measurements for both ends separately and take a side-on photo if you need help checking the shape.
Compare both finishes and check pack contents in our radiator cover cap buying guide.


