How to Fit Push-Fit Cover Caps on a Towel Rail
Quick answer
Let the towel rail cool, check that the existing fitting is sound and line up the cap squarely. Press it on gently by hand. Stop if it catches, tilts or needs force.
Prepare the fitting
Identify the bleed valve and blanking plug before covering them. Wipe the outside of the fitting with a soft cloth. Leave the bleed screw and threaded fitting in place while fitting the decorative cover.
Press the cap on by hand
- Hold the cap centred over the fitting, with its open side facing the fitting.
- Press gently and evenly so the cap sits square.
- Check that the cap sits level and stays in place without wobbling. If it won’t seat, use the fit troubleshooting guide to check the cause.
Keep the bleed valve accessible
Remember which cap covers the bleed valve. Follow the cap or rail instructions when removing the cover for servicing. If the cap feels stuck, ask the supplier how to remove it before applying force near the fitting.
Compare both finishes and check pack contents in our radiator cover cap buying guide.


